Tascam MX-8A digital matriksmikser med 8 kanaler inn/ut

Tascam MX-8A Digital matrix mixer

MX-8A er en 10 × 10 matrixmixer med åtte mic/line-innganger, åtte linjeutganger og stereo USB I/O kompatibel med programvare- eller skybaserte konferanseplattformer. Intern kraftig DSP-mikser og routing pluss flere lydbehandlingsfunksjoner og er ideell for mange bruksområder, inkludert møterom, oppholdsrom, rettssaler, restauranter, butikker osv.

DSP-funksjoner inkluderer en kompressor, fire-bånds parametrisk EQ og automatisk nivåkontroll for hver inngang. Utgangsseksjonen inneholder en 10-bånds EQ med høy-/lavpassfilter, delay og en limiter-funksjon per utgang, som alle kan justeres og lagres i ett av de 50 sceneminne sammen med mikser-/routingsinnstillingene. For å gjøre talen ved annonseringer tydeligere, er det også mulighet for automatisk ducking og en omgivende støykompensator.

MX-8A har naturlig lydende, høykvalitets Tascam mic-forsterkere, som gjør bruk av vår kunnskap og erfaring fra mange års produksjon av pro-lydutstyr. Inngangsnivåområdet er -77,5 dBu til +26 dBu, med tilsvarende inngangsstøy som oppnår mindre enn -126 dB, og et signal-til-støyforhold på over 108 dB.

MX-8A kan styres via to forskjellige programvareprogrammer for Mac, Windows, iOS og Android-enheter: Tascam MX Connect for konfigurasjon og Tascam EZ Connect for sluttbrukere, som begge er enkle å bruke og inkludert i enheten. Ved hjelp av Tascam MX Connect-installasjoner kan du raskt og enkelt konfigurere MX-8A og deretter tildele passende enkle kontroller for tilgang for brukere via Tascam EZ Connect.

Den valgfrie RC-W veggmonterbare kontrolleren (under forberedelse) tilbyr en grafisk skjerm og en push/turn multi-kontrollknapp.

Hardware features

Eight balanced mic/line inputs and eight balanced line outputs

Euroblock connectors - ideal for permanent installation

USB audio interface mode allows to record audio or play background music with a computer

Controllable via an Ethernet network (using the Tascam MX Connect computer application or the Tascam Mixer Protocol)

RS-485 (using a dedicated remote controller, planned)

RS-232C

Status indicator on front panel

USB connector on front panel for easy connection of a computer, tablet or smartphone (is also used for firmware updates)

High-quality internal power supply (no AC adapter)

19 inch rackmount size (1U)

Software features

Five different reference levels available to adapt to virtually any application in consumer, professional or broadcast environments (selectable via software)

Powerful DSP mixer (controllable via software) Input features: phantom power on/off, phase, sensitivity, trim, automatic level control, 4-band equalizer, mute, fader

Mixer features: Matrix mixer, ducking, ambient noise compensator (ANC), routing

Outputs features: 10-band equalizer, limiter, delay, mute, fader, phase

Up to 50 scene presets can be saved

Timer event function allows presets to be switched at specific times (planned for a future update)

Two types of control software available (compatible with Windows/Mac/iOS/Android devices): Tascam MX Connect for system integrators offers full access to virtually all settings

Tascam EZ Connect for end-users is a simple app for only the most necessary settings

USB audio interface features

Two audio inputs and two audio outputs when connected to a Windows/Mac computer or iOS/Android device

Allows audio to be recorded / played back via Windows Media Player, iTunes or DAW applications

Specifications

General

Audio formats 44.1/48 kHz, 16/24 bit

Inputs and outputs

USB port 4-pin USB B-type

Transfer rate USB 2.0 High Speed (480 Mbit/s)

Analogue inputs (ANALOG IN) Balanced Euroblock connectors, 3.81 mm pitch

Minimum input level -70 dBu

Maximum input level +26 dBu

Input impedance greater than or equal to 2.2 kOhm

Analogue outputs (ANALOG OUT) Balanced Euroblock connectors, 3.81 mm pitch

Nominal output level +4 dBu (Ref(D) does not equal -9 dBFS)

+6 dBu (Ref(D) equals -9 dBFS)

Maximum output level (selectable) +15 dBu (Ref(D): -9 dBFS)

+18 dBu (Ref(D): -14 dBFS)

+20 dBu (Ref(D): -16 dBFS)

+22 dBu (Ref(D): -18 dBFS)

+24 dBu (Ref(D): -20 dBFS)

Output impedance less than or equal to 200 Ohm

RS-232C connector D-sub 9-pin (female, inch-standard)

RS-485 connector RJ-45 connector

Recommended cable STP cable, Cat 5e or faster

Network connector (ETHERNET) RJ-45 connector

Transmission protocol TCP/IP

Ethernet standard 100BASE-TX

Recommended cable STP cable, Cat 5e or faster

Audio performance

Mic amp EIN (equivalent input noise) less than or equal to -126 dBu

(Mic in to Line out, input impedance: 150 Ohm, 22 kHz LPF, A-weighted, JEITA)

Frequency response 20 Hz - 20 kHz, ±0.5 dB

(+24 dBu input, Line in to Line out, GAIN at min., JEITA)

Distortion (THD+N) (+24 dBu input, 1 kHz, Line in to Line out, GAIN at min., JEITA)

S/N ratio greater than or equal to 106 dB

(+24 dBu input, Line in to Line out, GAIN at min., JEITA)

Crosstalk greater than or equal to 107 dB

(+24 dBu input, 1 kHz, Line in to Line out, GAIN at min., JEITA)

Dynamic range greater than or equal to 105 dB

(Line in to Line out, GAIN at min., JEITA)

Note: JEITA indicates compliance with JEITA CP-2150

Power supply and other specifications

Voltage requirements AC 100-240 V, 50/60 Hz

Power consumption 21 W

Dimensions 483 mm × 45 mm × 304 mm

(W × H × D, including protrusions)

Weight 3 kg

Permissible operating temperature range 0-40 °C